Your Choice...Wireless Radio Frequency (RF) Or Cable Connected Remote Copy Counter (RCC) Model 2301 For All Copiers, Duplicators & Printers

Call 352-796-2693 now for next day Priority Mail USPS shipment of orders entered prior to 10:00 am EST!
Order Part number 962301-001		  
   
 

 

    
 

 

Model 2301 Series Cable Connected or Wireless Remote Copy Counter (RCC)
for Copiers, Duplicators, Faxes, Microfilm & PC Printers

Designed to monitor copier & printer usage from a remote location or on the actual copier, duplicator or printer.

 

  • Counts number of copies or prints produced from radio frequency (Rf) pulse signals received from the host machine transmitter
  • Control copier, duplicator, fax or printer usage from a distance to a maximum of 100 feet
  • Resettable counter with red reset button
  • Full modular design mounts to any surface (counter)
  • For use on any copier, fax, microfilm printer or PC printer
  • Accepts a +5 ~ +24 VDC count pulse signal from the copy counter socket or registration paper clutch
  • Secure Computer Grade Locking key switch for security of reset of the total counts.
  • Virtually all copier & printer machine custom fabricated harnesses available
  • Basic copier machine RF transmitter harness included for virtually any copier, printer, office machine or other device.
  • Custom fabricated wireless transmitter harnesses & power supply for easy "Plug & Play"
  • 100% Digital with 8 segments
  • +12V fully regulated power supplies & 7 year battery back up of digital counter memory
  • Color in standard powder coat white finish
  • Replaces the older analog +24 volt Key Counter/Copy Counter or hard wired remote copy counter systems.

There is no reason to spend $700.00 for a competitive remote copy counter
when it is available for a fraction of any competitor copy counter access controller!


See a live video presentation on You Tube at:
http://www.youtube.com/watch?v=QcHrKsZDL0Q

The low cost $169.00 Model 2301 Wireless RF Remote Copy Counter (RCC) or the $129.00 (RCC) permits access control & accountability of copies/prints and copier/printer usage at the machine or from a remote location such as; from behind a desk, at the sales counter or from another room. Easy to install, the model 2301 has a resettable digital 8 digit counter and an easily accessible "on/off" key switch to reset the copier or printer machine. Charge the customer for the copies/prints from the display counter, then press the reset button to bring the digital counter back to zero.

The model 2301 is the ideal product for copy/print shops, convenience stores, school libraries or wherever remote control of a copier or printer is required.  The model 2301 easily attaches to any surface with two strips of Velcro included with the unit. The model 2301 small foot print size is attractively packaged and is small enough to locate almost anywhere.     

Basic instructions : 1st step is to locate the copy counter interface of your copier.  It is generally a 4 wire connector.  Connect the custom fabricated Wireless Radio Frequency transmitter & harness to the copier/duplicator/printer with simple easy to install instructions.  In the event you do not have a copy counter connector, then attach the red and the green wires from the RF transmitter across the 2 wires for the registration paper clutch.  Every copier/printer has this registration paper clutch that is always +24 volts.   Follow the custom machine RF transmitter harness instructions that accompanies the kit for installation of this wireless radio frequency remote copy counter.  Note...If you are using the copy vend or copy counter interface of the copier/printer, then you will have to configure the copier/printer to operate as an access or vend controlled machine.

 The World's Only Wireless Radio Frequency Copier/printer Remote Copy Counter on the market today!  
Contact our sales department at 352-796-2693 for next day shipment.

Hit Counter