 |
International HI-07CS Single Electronic Coin Mechanism.
Mechanism can be instantly set to acceers. Simple configuration for your
coin acceptance is set by inserting your coin denomination under the
cradle as shown in this picture. It is that easy! pt virtually any coin
denomination while rejecting all oth Heavy duty thick chrome die cast bezel with reject lever for bent coins. 12 volts DC input with a momentary 50ms output signal. Included is a 12 Volts DC output to a optional coin meter. Inhibit line optional. Electronic Coin mechanism with face plate includes the harness and mounting hardware with schematic. Dimensions: Face Plate 63mm x 122mm. Depth: 127mm. Weight: 438 grams/15.5 oz. Face plate is chrome plated die cast metal. |
|
|
International RM5 Electronic Multiple Six (6) Coin
Acceptance Mechanism, part number 301414-USP. Mechanism can be instantly self-programmed
to accept virtually any coin denomination while rejecting all others.
Diameter Specifications: 18mm - 30mm Configured as a set of parts to include the coin mechanism and the front bezel plate as an assembly. Interface via a 2x5 AMP connector for normal parallel interface or available special order with an USB interface. Request USB part number RL5FZC24UK2-USB +12 or +24 volts DC input with a momentary 50ms output signal from six (6) lines or configured to escrow the value with a output in .05 pulses. Example; Insert a .25 value coin and receive 5 pulses. Output can ordered with a nickel ($0.05) stream of pulses . Example five (5) pulses for a ($0.25) quarter. Includes inhibit line for lock out of coins. Electronic Coin mechanism with face plate includes the 24 inch ribbon cable harness. Dimensions: Face Plate 60mm x 118mm. Depth: 95mm. Weight: 219 grams/7.5 oz. Face plate is plastic. Instructions on how to program coins with the RM5. The ribbon cable part number 601325-RM5 is optional at a $15.00 cost. |
|
|
The model AO7MO is a single coin quarter mechanism with
mini front coin entrance face plate and return slot. Vend activation is with a electromechanical switch. Drawing specifications are located at: http://www.industrias-lorenzo.com/g3repository/PRODUCTO/219493F0.PDF
|
