|International Electronic Coin Mechanism. Mechanism
can be instantly set to accept virtually any coin denomination while
rejecting all others. Simple configuration for your coin
acceptance is set by inserting your coin denomination under the cradle
as shown in this picture. It is that easy!
Heavy duty thick chrome die cast bezel with reject lever for bent coins.
12 volts DC input with a momentary 50ms output signal. Included is a 12 Volts DC output to a optional coin meter. Inhibit line optional.
Electronic Coin mechanism with face plate includes the harness and mounting hardware with schematic. Dimensions: Face Plate 63mm x 122mm. Depth: 127mm. Weight: 438 grams/15.5 oz. Face plate is chrome plated die cast metal.
|International Electronic Multiple Six (6) Coin Acceptance
Mechanism. Mechanism can be instantly self-programmed to accept
virtually any coin denomination while rejecting all others.
Diameter Specifications: 18mm - 30mm
Configured as a set of parts to include the coin mechanism and the front bezel plate as an assembly. Interface via a 2x5 AMP connector.
+12 or +24 volts DC input with a momentary 50ms output signal from six (6) lines or configured to escrow the value with a output in .05 pulses. Example; Insert a .25 value coin and receive 5 pulses. Output can ordered with a nickel ($0.05) stream of pulses . Example five (5) pulses for a ($0.25) quarter. Includes inhibit line for lock out of coins.
Electronic Coin mechanism with face plate includes the 24 inch ribbon cable harness. Dimensions: Face Plate 60mm x 118mm. Depth: 95mm. Weight: 219 grams/7.5 oz. Face plate is plastic. Instructions on how to program coins with the RM5.