The CTD-102/103 RFID reader-card dispenser is designed as an automated combination Card Dispenser & RFID reader.

Operational Specifications for the CTD-102RFID Part Number 900527-RFIDR/W are as follows:
 

• One application is to dispense a new RFID card from a command from the host PC.  Upon the initial dispenser into the RFID reader, the RFID Card is held in the card transport awaiting confirmation of the read of the data of the RFID card by the host PC.
   
• Once the host PC confirms the data to be correct, the host PC will send a serial command that will then push the card through the slot into the hands of the customer.
   
• An alternate insertion of an existing RFID card in the RFID reader/card dispenser slot to get the read from it and then transmit the RFID serial number to host PC automatically. The host will then send the command to push the card out when it's done. This feature is similar to other more expensive motorized RFID card readers with an attached card dispenser.
   
• The operator can check the system by using the web browser connected to network.
   
• Note:  There are many different RFID formats.  Specifications of the RFID card is required to mate the correct RFID reader mechanism to the CTD-102/103 dispenser & Raptor II controller board.  The CTD-102RFID dispenser-encoder is ideal for Mifare Card Applications
   
• For additional .pdf photos, click here   
   
• The CTD-102RFID literature.