Final Assembly of the 5004C on 8 Selection Console

	Attach the brass door hinge bracket to the top spacer panel.
	Tighten the six M5 nuts to secure the top assembly to the side panels.
	Place the P clamp over the harnesses using one of the M5 screws for the side frame. Attach the brass hinge to the front door and set the front door on the three studs of the front base. Screw on the M5 nuts so the top of the nuts are flush with the studs. Do not tighten all the way down! Install harnesses into respective push buttons and LED openings of the front door. Slide the 4 card dispensers on the track plates of the two shelves and plug in the harnesses to each. It is ready to operate.
	Finished 5004C with a total of 8 selections.